Air Conditioner Radiators
Copper-aluminum coils from AC units. Separated into clean copper and aluminum.
Application / Materials
Copper-Aluminum Radiator Recycling
One-Stop Crushing & Separation Solution
The application
Copper-Aluminum Radiator Recycling Solution
Copper-aluminum radiators contain high-value copper and aluminum that are difficult to separate by traditional methods. Advanced recycling technology efficiently separates copper tubes from aluminum fins with high purity, maximizing metal recovery and profit. Our turnkey solutions transform scrap radiators into clean, furnace-ready copper and aluminum—turning complex scrap into valuable circular resources.
Automotive Radiators
Vehicle cooling radiators. Dismantled and separated into copper tubes and aluminum fins.
Copper Tubes
Recovered copper tubes. Cleaned and baled for high-purity copper recycling.
Aluminum Fins
Separated aluminum fins. Baled and remelted into aluminum ingots.
A practical processing route
From irregular waste to consistent feedstock.
Define the feedstock
Confirm radiator composition, remaining attachments and the required copper/aluminum recovery route.
Plan the feeding
Select a feeding arrangement around the material dimensions, bulk density and required operating duty.
Configure size reduction
Select the cutting system, drive and operating conditions around the material and processing target.
Coordinate downstream handling
Coordinate size reduction with the selected metal separation and recovery stages.
Recommended starting point
WLP Series
Modular industrial shredding engineered around your material, duty cycle and required output.
View equipment ↗
Selected project reference
Copper-Aluminum Radiator Recycling Solution
One-Stop Crushing & Separation Solution
View project details ↗Questions that affect machine selection.
What should I confirm about Copper-aluminum radiators?
Confirm radiator composition, remaining attachments and the required copper/aluminum recovery route.
How is the equipment or process selected?
Selection considers material form and composition, required capacity, contamination, operating hours and the downstream result. A material review is needed before confirming a configuration.
Can the final output be specified?
Define the size or fraction required by the next process. Cutter geometry, any sizing or separation stages, feeding and material behavior must be considered together.
What information should I send first?
Send representative material photos, dimensions, hourly capacity, required output, site constraints and destination country.
Show us the material you need to process.
Include material photos, largest dimensions, hourly capacity, target output size and what happens after shredding.
Discuss this application →