Waste Furniture
Discarded sofas, beds, and cabinets. Dismantled and shredded into recyclable materials and RDF fuel.
Application / Materials
Bulky Waste Recycling
One-Stop Crushing & Separation Solution
The application
Bulky waste is not just waste; it is a resource.
Because of their large size and complex construction, bulky items cannot be processed effectively through conventional waste treatment systems. As a result, a dedicated resource processing system is necessary. Our recycling system recovers useful resources from bulky waste.
Waste Mattresses
Old mattresses. Separated into metal springs, foam, and textiles for recycling.
Bulky Appliances
Refrigerators, washing machines, and air conditioners. Dismantled for metal recovery and plastic recycling.
Mixed Bulky Waste
Discarded furniture, mattresses, and appliances. Dismantled, shredded, and sorted into recyclables, RDF/SRF fuel, and inert residues.
A practical processing route
From irregular waste to consistent feedstock.
Define the feedstock
Confirm the size and composition of furniture, mattresses and other bulky items, including embedded metal.
Plan the feeding
Select a feeding arrangement around the material dimensions, bulk density and required operating duty.
Configure size reduction
Select the cutting system, drive and operating conditions around the material and processing target.
Coordinate downstream handling
Coordinate reduced material with the selected metal separation and downstream recovery stages.
Recommended starting point
WLP Series
Modular industrial shredding engineered around your material, duty cycle and required output.
View equipment ↗
Selected project reference
Bulky Waste Recycling Solution
One-Stop Crushing & Separation Solution
View project details ↗Questions that affect machine selection.
What should I confirm about Bulky waste?
Confirm the size and composition of furniture, mattresses and other bulky items, including embedded metal.
How is the equipment or process selected?
Selection considers material form and composition, required capacity, contamination, operating hours and the downstream result. A material review is needed before confirming a configuration.
Can the final output be specified?
Define the size or fraction required by the next process. Cutter geometry, any sizing or separation stages, feeding and material behavior must be considered together.
What information should I send first?
Send representative material photos, dimensions, hourly capacity, required output, site constraints and destination country.
Show us the material you need to process.
Include material photos, largest dimensions, hourly capacity, target output size and what happens after shredding.
Discuss this application →