Wear-resistant alloy cutters
Alloy cutting tools and replaceable blade construction support demanding shredding duty and practical wear-part replacement.
Discuss this configuration →Twin-shaft
Heavy-duty dual-shaft shredder
High-torque primary shredding for bulky, mixed and difficult materials under demanding duty.
WLP Series
Best suited forBulky waste/ industrial waste / metal
Total installed power60–400 kW total
Listed model throughput2–25 t/h
Sales engineerDiscuss your application ↗Response within one business day01 · Product introduction
Built around the material and the required result.
Application-specific configurationServiceable cutting systemApplication-specific cutter geometryContinuous-duty construction
Engineered around the material
Low-speed, high-torque twin-shaft shredding for bulky and difficult feedstock. Tell us the feedstock, hourly capacity and target output. WALI engineers will configure the cutting system, drivetrain and downstream process for the operating conditions.
02 · Equipment features
Engineering details that affect daily operation.
Anti-wrapping fixed knives
Fixed knives help limit material wrapping around the cutting shafts and reduce interruptions during processing.
Discuss this configuration →
Multi-stage bearing seals
The bearing sealing arrangement helps protect critical components against contamination in demanding working environments.
Discuss this configuration →
PLC monitoring and control
The control interface supports operating-status monitoring, alarms and overload management.
Discuss this configuration →Automatic reverse protection
The shafts reverse when a jam or excessive load is detected to release the obstruction and protect the drivetrain.
Discuss this configuration →
Accessible wear-part maintenance
Replaceable cutters and accessible service points support planned inspection and wear-part maintenance.
Discuss this configuration →03 · Application range
Match the machine to the duty.
- Plastics: lumps, pallets, drums and engineering-plastic products.
- Electrical appliances: housings from televisions, monitors and domestic equipment.
- Electronic waste: computer cases, hard disks, optical drives, cartridges and batteries.
- Pipes: PVC, PE and PP pipe, including selected water-supply pipe.
- Rubber: waste tires, belts and mixed rubber products.
- Light metals: copper, aluminum, thin steel sheet and castings of suitable thickness.
- Wood: boards, pallets, branches and production offcuts.
- Agricultural residue: straw, corn stalk and similar biomass.
The WLP uses low-speed, high-torque counter-rotating shafts for primary size reduction of bulky and difficult material. Cutter thickness, hook profile, shaft speed and drive power are configured around the feedstock and target capacity. As there is no sizing screen, the discharged fraction is primarily determined by cutter geometry and material behavior.
Direct engineering contact
Need a quotation or configuration advice?
Send your material, hourly capacity and target output. A WALI engineer will help define a practical starting point.
Talk to an engineer →
APPLICATION ENGINEERING · WALIMachine in operation
See the machine working with real material.
Watch the feeding, stable processing and resulting output under real operating conditions.
04 · Compare models
WLP Series model range.
Use this table for preliminary comparison. Throughput depends on the feedstock, cutter geometry, feeding consistency and operating conditions. These unscreened shredders do not guarantee a uniform final particle size. Power summaries add the listed installed motors; capacity ranges span the listed model values and remain material-dependent.
| Specifications | WLP-710 | WLP-812 | WLP-912 | WLP-1016 | WLP-1220 |
|---|---|---|---|---|---|
| Drive power | 30+30 kW | 45+45 kW | 55+55/75+75 kW | 90+90/110+110 kW | 200+200 kW |
| Cutting chamber | 1000*690 mm | 1200*790 mm | 1200*980 mm | 1600*1070 mm | 2100*1280 mm |
| Typical throughput | 2-3 t/h | 3-5 t/h | 5-8/6-9 t/h | 8-10/10-12 t/h | 20-25 t/h |
| Typical output | 50–100 mm | 50–100 mm | 50–100 mm | 50–100 mm | 50-100 mm |
Technical documents
View product information.
Open a brochure online before deciding whether to download it. Contact our team for a project-specific configuration.
PDFProduct brochure
Successful applications
View all projects ↗Projects using WALI equipment.
CompletedJiangsu China
Bulky Waste Recycling Solution- Jiangsu-Suqian
One-Stop Crushing & Separation Solution
View project ↗
CompletedNanjing China
Bulky Waste Recycling Solution-Nanjing-Qilin
One-Stop Crushing & Separation Solution
View project ↗
CompletedNanjing China
Bulky Waste Recycling Solution-Nanjing-Gaochun
One-Stop Crushing & Separation Solution
View project ↗Real factory delivery
Built, checked and prepared for delivery.
Selected packing and shipment records associated with this equipment family.
View factory delivery records ↗Export container loading
WLP
After 40 days of precision manufacturing, the heavy-duty dual-shaft shredder is officially shipping to the customer's site today. The photos show the actual loading and delivery process. The equipment has been properly reinforced and protected to ensure safe arrival.
Domestic delivery
WLP
Following 50 days of precision manufacturing and full-load testing, all performance metrics of the equipment have fully met the standards. The images document the actual loading and delivery process, with proper securing and moisture-proof measures in place to guarantee safe arrival.
Frequently asked questions
Before you choose a machine.
Clear answers about selection, manufacturing, delivery and support.
Are you a factory or a trading company?
WALI is an industrial shredder and recycling equipment manufacturer with its own production and assembly capabilities.
Where is your company?
WALI's manufacturing base is located in Anhui Province, China, with convenient access for international customer visits.
How do you ensure that the machine I order is suitable for my material?
Send us material photos or samples, hourly capacity, target output size and operating conditions. Our engineers will review the application and recommend a suitable machine and cutting configuration.
Do you support OEM and ODM?
Yes. Machine configuration, color, branding and line layout can be discussed according to the project requirements.
What is the minimum order quantity?
The usual minimum for equipment is one machine or one set. Spare and wear-part quantities depend on the specific item; please confirm them with our sales team.
How do you ensure machine quality?
Critical materials, machining, assembly and inspection are controlled through the production process, and the machine is tested before delivery.
How long is the delivery time?
Delivery depends on the selected model, customization and production schedule. A confirmed lead time is provided after the technical scope is agreed.
What are your payment terms?
Payment terms are confirmed in the official quotation and contract for each project.
How are the machines packed?
Equipment is protected for export shipment according to its dimensions, weight and selected transport method.
What is the warranty period?
The applicable warranty period and coverage are stated in the project quotation and contract. Please confirm these terms before ordering.
How do you provide after-sales service?
Support can include remote technical guidance, documentation, spare parts and on-site commissioning where agreed in the project scope.
Do you provide training?
Operating and maintenance training can be provided remotely or on site according to the agreed project scope.
Will you provide technical documents?
Operating manuals and the technical documents included in the agreed supply scope are provided with the project.
What shipping methods do you support?
Sea and land freight are commonly used for machinery, while suitable parts may also be shipped by air or express. The final method depends on destination and cargo size.
Can this equipment be customized?
Yes. The cutting system, drive, controls, dimensions and line integration can be configured according to the project.
Get a preliminary configuration
Is this the right series for your material?
Send your capacity, input photos and target output. We will respond with a recommended starting point.
