Waste Pallets
Discarded wooden pallets. Shredded and pelletized into biomass fuel.
Application / Materials
Wood Recycling
One-Stop Crushing & Separation Solution
The application
Wood Recycling
Waste wood is a valuable biomass resource, not landfill fodder. Recycling wood into biomass pellets provides a clean, renewable alternative to fossil fuels, reduces deforestation pressure, and cuts carbon emissions. Our turnkey solutions efficiently shred, dry, and pelletize wood waste into high-density biomass pellets for boilers, power plants, and home heating—turning wood waste into green energy.
Tree Branches & Trimmings
Pruned branches and garden wood. Chipped, dried, and pelletized for energy.
Waste Furniture Wood
Discarded furniture and boards. Dismantled, shredded, and pelletized into biomass pellets.
Sawdust & Wood Chips
Sawmill and woodworking residues. Dried and pelletized into high-density biomass pellets
A practical processing route
From irregular waste to consistent feedstock.
Define the feedstock
Confirm wood form, moisture, embedded metal and the required downstream use.
Plan the feeding
Select a feeding arrangement around the material dimensions, bulk density and required operating duty.
Configure size reduction
Select the cutting system, drive and operating conditions around the material and processing target.
Coordinate downstream handling
Prepare the reduced wood for the selected sorting, fuel preparation or recycling process.
Recommended starting point
WLDX Series
Industrial equipment configured around material characteristics, capacity and the complete recycling process.
View equipment ↗
Selected project reference
Biomass Pelletizing Solution
One-Stop Crushing & Separation Solution
View project details ↗Questions that affect machine selection.
What should I confirm about Waste wood?
Confirm wood form, moisture, embedded metal and the required downstream use.
How is the equipment or process selected?
Selection considers material form and composition, required capacity, contamination, operating hours and the downstream result. A material review is needed before confirming a configuration.
Can the final output be specified?
Define the size or fraction required by the next process. Cutter geometry, any sizing or separation stages, feeding and material behavior must be considered together.
What information should I send first?
Send representative material photos, dimensions, hourly capacity, required output, site constraints and destination country.
Show us the material you need to process.
Include material photos, largest dimensions, hourly capacity, target output size and what happens after shredding.
Discuss this application →